Receiver for Long-distance, Low-backscatter LiDAR
Sensors
Receiver for Long-distance, Low-backscatter LiDAR (LAR-TOPS-387)
Hybrid optic LiDAR receiver compatible with > 1mJ fiber lasers
Overview
Researchers at the NASA Langley Research Center have developed a new coherent LiDAR (light detection and ranging) receiver compatible with high-energy fiber lasers. The hybrid receiver incorporates robust bulk optics (i.e., dielectric, coated optics) to handle high pulse energy where needed and fiber optics where damage tolerance is not critical. Commercially available receivers leveraging fiber optic components for metrology and remote sensing are not compatible lasers above ~100 micro-J. This restriction limits measurement distances to only a few kilometers out and to the lower atmosphere where aerosols are abundant. The new NASA design allows full advantage to be taken of novel high-energy pulsed laser technology to enable Doppler LiDAR measurements out to longer distances (> 10 km) and/or in conditions of lower aerosol backscatter for applications in markets including wind energy, aerospace & defense, and meteorology & environmental sensing.
The Technology
The NASA receiver is specifically designed for use in coherent LiDAR systems that leverage high-energy (i.e., > 1mJ) fiber laser transmitters. Within the receiver, an outgoing laser pulse from the high-energy laser transmitter is precisely manipulated using robust dielectric and coated optics including mirrors, waveplates, a beamsplitter, and a beam expander. These components appropriately condition and direct the high-energy light out of the instrument to the atmosphere for measurement. Lower energy atmospheric backscatter that returns to the system is captured, manipulated, and directed using several of the previously noted high-energy compatible bulk optics. The beam splitter redirects the return signal to mirrors and a waveplate ahead of a mode-matching component that couples the signal to a fiber optic cable that is routed to a 50/50 coupler photodetector. The receiver’s hybrid optic design capitalizes on the advantages of both high-energy bulk optics and fiber optics, resulting in order-of-magnitude enhancement in performance, enhanced functionality, and increased flexibility that make it ideal for long-distance or low-backscatter LiDAR applications.
The related patent is now available to license. Please note that NASA does not manufacturer products itself for commercial sale.
Benefits
- Compatible with Novel Laser Technology: Enables use of high-energy fiber lasers that significantly enhance coherent LiDAR performance
- Longer-Distance Measurement: Enables wind measurement at distances beyond 10 kilometers from receiver
- Lower-Backscatter Measurement: Enables collection of atmospheric data significantly higher into the atmosphere where aerosol particles are less abundant
- High value: Optimized combination of bulk and fiber optics minimizes costs and maximizes performance
- Versatility: Broadly enhances coherent LiDAR system capabilities regardless of application
Applications
- Aerospace & Defense: Monitoring wind speed, direction, shear, and turbulence for aircraft navigation and safety; high-precision target acquisition and tracking; enhancing autonomous navigation and obstacle avoidance for advanced air mobility aircraft such as drones and eVTOLs
- Wind Energy: Optimizing the placement, performance, and safe operation of wind turbines through detailed wind resource assessment and real-time wind monitoring.
- Meteorology & Environmental Monitoring: Measuring atmospheric conditions to improve weather models and more generally build enhanced database of wind patterns, pollutants, and particulate matter in the atmosphere
Technology Details
Sensors
LAR-TOPS-387
LAR-20317-1
|
Tags:
|
Similar Results
Pulsed 2-Micron Laser Transmitter
The new NASA LaRC Pulsed 2-Micron Laser Transmitter for Coherent 3-D Doppler Wind Lidar Systems is an innovative concept and architecture based on a Tm:Fiber laser end-pumped Ho:YAG laser transmitter. This transmitter meets the requirements for space-based coherent Doppler wind lidar while reducing the mission failure risks. A key advantage of this YAG based transmitter technology includes the fact that the design is based on mature and low-risk space-qualified YAG host crystal. The transmitter operates at a 2096 nm wavelength using Ho:YAG, resulting in high atmospheric transmission (>99%), versus a transmitter operating at 2053 nm using co- doped Tm:Ho:LuLiF, which suffers limited transmission (90%) due to water vapor interference. In-band pumping through Tm:Fiber pump Ho:YAG architecture offers lower quantum defect from 1908 to 2096 nm (9.1%) compared to traditionally used co-doped Tm:Ho:LuLiF of 792 to 2051 nm (61%). The transmitter has an efficient pump compared to LuLF, since YAG has 27% higher pump absorption and 52% lower reabsorption of the emitted 2-micron, resulting in higher efficiency and lower heat load. Being isotropic, YAG is amenable for spatial-hole burning mitigation which supports linear cavity architecture without compromising injection seeding quality. This attribute is important in designing a compact, stable, high seeding efficiency laser. A folded linear cavity for long pulse (>200 ns), transform limited line-width (2.2 MHz) and high beam quality (M2 = 1.04) - the most critical parameters for coherent detection - are easier to achieve using YAG compared to LuLF. Lower heat load results in high repetition rate (>300 Hz) operation, which allows higher probability of wind measurements through broken clouds, off clouds, and below clouds, thus reducing errors and increasing science data product quantity and quality.
Recirculating Advanced Coupled-cavity Etalon Receiver (RACER)
Advanced Coupled-cavity Etalon (ACE) significantly improves both in-band transmission and out-of-band rejection. In some cases, 12% more light is transmitted inside the passband and >3x more light is rejected outside the passband. Incorporating ACE into the recirculating etalon receiver (RER) improves performance significantly. ACE increases the wavelength resolution and enables closer channel spacing resulting in a very efficient, high resolution spectrometer. RACER has both high resolution and a high photon efficiency which allows flexibility for trading different combinations of reduced cross-talk and closer channel spacing.
Real-Time LiDAR Signal Processing FPGA Modules
The developed FPGA modules discern time-of-flight of laser pulses for LiDAR applications through the correlation of a Gaussian pulse with a discretely sampled waveform from the LiDAR receiver. For GRSSLi, up to eight cross-correlation engines were instantiated within a FPGA to process the discretely sampled transmit, receive pulses from the LiDAR receiver, and ultimately measure the time-of-flight of laser pulses at 20-picosecond resolution. Engine number is limited only by the resources within the FPGA fabric, and is configurable with a constant. Thus, potential time-of-flight measurement rates could go well beyond the 200-KHz mark required by GRSSLi. Additionally, the engines have been designed in an extremely efficient manner and utilize the least amount of FPGA resources possible.
Laser Linear Frequency Modulation System
For decades, frequency modulation has been used to generate chirps, the signals produced and interpreted by sonar and radar systems. Traditionally, a radio or microwave signal is transmitted toward the target and reflected back to a detector, which records the time elapsed and calculates the targets distance. Reflected signals can be heterodyned (combined) with output signals to determine the Doppler frequency shift and the target velocity. Accuracy of these systems can be enhanced by increasing the bandwidth of the chirp, but noise generated during heterodyning at high frequencies decreases the signal-to-noise ratio, increasing measurement error.
Previous attempts at laser frequency modulation that relied on adjusting the laser cavity length have resulted in only sine wave or imperfect triangle waveforms. Heterodyning of imperfect, non-linear waveforms or sine waveforms will significantly degrade the effective signal-to-noise ratio, making such systems impractical. In contrast, the current technology produces a single, high-frequency laser that is passed to an electro-optical modulator, which generates a series of harmonics. This range of frequencies is then passed through a band-pass optical filter so the desired harmonic frequency can be
isolated and directed toward the target. By modulating the electrical signal applied to the electro-optical modulator, a near perfect triangular waveform laser beam can be produced. Transmission and detection of this highly linear triangular waveform facilitates optical heterodyning for the calculation of precise frequency and phase shifts between the output and reflected signals with a high signal-to-noise ratio. By combining this information with the time elapsed, the location and velocity of the target can be determined to within 1 mm or 1 mm/s.
Continuous Wave Laser Source for Injection Seeding
NASA's CW Laser Source for Injection Seeding uses a single laser diode (LD) to produce multiple wavelengths. Depending on the application, the seed laser may or may not be locked to a wavelength reference. For example, in atmospheric differential absorption lidar (DIAL) active remote sensing applications, the seed laser has to be locked and referenced to the species of interest using gas cells. In this context, the seed laser source is first locked to an absorption feature and the generated wavelength is used as a reference from which other offset wavelengths are generated. However, if the requirement calls only to avoid atmospheric absorption then locking may not be required.
Using this new technology, an airborne 2-micron triple pulse integrated path differential absorption (IPDA) LIDAR instrument has been developed at NASA Langley Research Center to measure the column content of atmospheric H2O and CO2 simultaneously and independently. This is achieved by transmitting three successive high-energy pulses, seeded at three different wavelengths, through the atmosphere. The three pulses are emitted 200 microseconds apart and repeated at 50 Hz. The seeding wavelengths were selected to achieve minimum measurement interference from one molecule to the other. Typically, this requires four different CW lasers for seeding. A part of that effort focused on adaptive targeting, which is based on the tuning capability of the on-line wavelength to meet a certain measurement objective depending on observational time and location. The off-line wavelength was assumed constant. The tuning capability can be achieved using the claimed seeding technique using a voltage-controlled oscillator for the on-line and fixed oscillator for the off-line.
